Perth & Peel epoxy flooring

Epoxy Flooring Perth

Epoxy Floor Perth installs epoxy flooring across the Perth metropolitan area and the Peel region, from Yanchep to Mandurah. We coat garages, alfrescos, warehouses, commercial kitchens and showrooms in flake, metallic, polyaspartic and solid-colour systems. Every job starts with a free on-site measure and a slab moisture test, and every floor carries a 5-year written workmanship warranty.

Why Property Owners Trust Our Contractor

✅AS/NZS 4586 rated

 

✅5-year written warranty

 

✅~90% dust capture

 

✅Fixed-price quotes

About us

Trusted Local Epoxy Flooring Contractor in Perth

We are a Perth epoxy flooring contractor. We coat garages, warehouses, commercial kitchens and showrooms across the Perth metropolitan area and the Peel region and we prepare every slab properly before we do, because that is the part that decides whether a floor lasts two years or twenty.

Most epoxy floors that fail in Perth did not fail because of the resin. They failed because the slab underneath was never properly prepared coated over paint, over a sealed surface, or over concrete still releasing moisture. Preparation is roughly 60% of the labor on a floor we install, and it is the first thing a cheap quote removes.

Diagnose your floor

Is your concrete floor staining, dusting or peeling?

Bare and painted concrete fails in eight predictable ways in Perth. Each one has a clear cause and a specific fix. Find the problem you have in the table below.

What you are living withWhy it is happeningWhat fixes it
Oil and tyre stains that will not scrub outBare concrete is porous and soaks oil into the slabA sealed flake or solid-colour coating: garage floor coating
Dust on the cars, the tools and through the houseThe slab surface is wearing and releasing fine dustConcrete densification or a bonded coating
Paint lifting where the tyres sitFloor paint sits on top of the slab and softens under warm tyresA ground slab and a hot-tyre-rated system: garage floor coating
A floor that has yellowedThe topcoat was not UV-stable and the floor gets direct sunA recoat in polyaspartic flooring
Epoxy peeling, bubbling or lifting in sheetsIt was coated over a sealed, unground or damp slabDiagnose, grind back and reinstall: epoxy floor repair
A floor that is dangerous when wetNo slip rating was set for how the floor is usedAnti-slip flooring to AS/NZS 4586
Cracks spreading across the slabShrinkage or movement cracks were left openRouted and resin-filled before coating: epoxy floor repair
A failed hygiene or safety auditA porous or jointed floor holds contaminationA seamless, coved food-grade system: commercial kitchen flooring

Epoxy flooring fixes all eight. It is a two-part resin coating that bonds to ground concrete and cures into a seamless, non-porous floor 0.3 to 6 mm thick. It resists oil, chemicals, wear and impact.

Epoxy is not floor paint. Paint sits on top of the slab and lifts under hot tyres and spilled fuel, so garage paint often fails within 2 to 3 years. A correctly installed epoxy floor lasts 10 to 20 years. Preparation decides which result you get, not the brand of resin.

Published prices

How much does epoxy flooring cost in Perth?

Epoxy flooring in Perth costs $30 to $150 per square metre installed, depending on the system, the slab condition and the floor size. A double garage in flake usually costs $2,100 to $3,400. Larger floors cost less per square metre, because setup and grinding are fixed costs. See the full guide to epoxy flooring cost in Perth.

Price by flooring system

Each system has its own price band and lifespan. These are typical installed prices for Perth floors:

SystemInstalled costTypical lifeBest for
Solid-colour epoxy$30-$55 / m²10-15 yearsWarehouses, workshops, budget garages
Epoxy flake$55-$90 / m²15-20 yearsGarages, alfrescos, patios, laundries
Polyaspartic$70-$120 / m²15-20 yearsSun-exposed floors, fast turnaround
Metallic epoxy$80-$150 / m²10-15 yearsShowrooms, living areas, feature floors
Polished concrete / grind and seal$50-$100 / m²20+ yearsOpen-plan homes, retail, hospitality
Heavy-duty industrial$60-$150 / m²15-25 yearsFactories, cool rooms, food production

Price by garage size

Most Perth garage quotes fall into one of three sizes. Prices below are for epoxy flake:

GarageFloor areaFlake price
Single18-21 m²$1,200-$1,900
Double36-40 m²$2,100-$3,400
Triple54-60 m²$3,000-$4,800

What changes your price

Four things push a quote up:

We give you a fixed price after we measure the floor and test the slab. That price does not change once work starts, unless you change the job.

What epoxy flooring services do we offer?

We install twelve epoxy and concrete flooring systems across Perth, grouped into residential coatings, decorative concrete finishes, commercial and industrial systems, and remediation of failed floors. Every service is quoted at a fixed price after an on-site measure and a slab moisture test.

Garage floor coating

Single, double and triple garages in flake or solid colour, rated for hot tyres and point loads.

Flake flooring

Vinyl flake broadcast systems for garages, alfrescos, patios and pool surrounds.

Metallic epoxy

Poured-marble decorative finishes for showrooms, retail fitouts and interior living areas.

Polyaspartic flooring

UV-stable, fast-cure coatings for sun-exposed floors and low-downtime commercial sites.

Polished concrete

Mechanically ground and sealed slabs for open-plan homes, retail and hospitality.

Concrete Densification

Permanent chemical hardening that stops slab dusting and efflorescence in warehouses.

Commercial epoxy flooring

Hygienic, slip-rated floors for retail, hospitality, gyms and medical fitouts.

Industrial epoxy flooring

Chemical-resistant, heavy-load systems for factories, workshops and processing plants.

Commercial kitchen flooring

Food-grade, HACCP-compliant coved systems for kitchens and food production areas.

Anti-slip flooring

Slip-resistant coatings specified and nominated to AS/NZS 4586.

Epoxy floor repair

Diagnosis and rectification of peeling, bubbling and delaminated floors.

Construction Services

We install twelve epoxy and concrete flooring systems across Perth

Compare systems

Which epoxy flooring system suits your floor?

Choose the system for how the floor is used, not how it looks. Floors in the sun need a UV-stable topcoat. Wet areas need a tested slip rating. Floors that carry forklifts need a thicker build coat than a home garage.

SystemWalk onDrive onUV-stableSlip ratingTime on site
Solid-colour epoxy24 hours5-7 daysNoP2-P31-2 days
Epoxy flake24 hours5-7 daysWith UV topcoatP4-P51-2 days
Polyaspartic4-6 hours24 hoursYesP3-P51 day
Metallic epoxy24 hours5-7 daysNoP1-P22-3 days
Polished concrete24 hours24-48 hoursYesP2-P42-4 days
Heavy-duty industrial24-48 hours7 daysDepends on systemP4-P53-5 days

We bring physical samples to the measure, so you see the finish in your own light. Browse our epoxy flooring colours before we arrive.

Perth conditions

Will your floor yellow in the Perth sun?

Standard epoxy turns yellow under UV light. Perth’s summer UV index regularly reaches the extreme band of 11 and above, so a standard epoxy topcoat on an alfresco or a sunny garage doorway can visibly yellow within 12 to 24 months.

The fix is chemistry, not cleaning. An aliphatic polyaspartic or polyurethane topcoat is UV-stable and holds its colour. We put a UV-stable topcoat on every floor that gets direct sun, including alfrescos, patios, pool surrounds, carports and the first metre inside a north- or west-facing garage door.

Any quote that offers standard epoxy for an outdoor floor is quoting a floor that will change colour. Ask which topcoat is specified before you accept a quote.

New builds

Is your slab ready to be coated?

A new slab needs at least 28 days before coating. Fresh concrete releases moisture as it cures, and that moisture breaks the bond between resin and slab. Coating too early is the most common cause of peeling on new builds.

Age alone does not prove a slab is ready, so we test the slab’s relative humidity before every job and write the reading on your job sheet. A reading above 75% needs a moisture-barrier primer first. This matters most in new estates such as Baldivis, Ellenbrook, Alkimos, Byford and Banksia Grove, where slabs are often coated before they are ready.

What happens on the day we install your floor?

Three stages, in fixed order: assessment and moisture testing, dust-free diamond grinding, crack and joint repair, priming, the pigmented build coat, scrape-back and topcoat, then inspection and handover. Preparation consumes roughly 60% of the labour on a correctly installed floor.

1. Assessment and moisture test

We measure the floor, inspect for cracks, oil contamination and previous coatings, and record a slab relative-humidity reading.

2. Dust-free diamond grinding & Crack and joint repair

Industrial diamond grinders open the concrete surface profile, running with vacuum extraction. Grinding, not acid etching, is what creates a mechanical key.
Cracks are routed out and filled with a structural resin. Expansion joints are preserved, not bridged, so slab movement does not telegraph through the finished floor.

3. Start the Work

Once everything is in order, we’ll schedule a start date for the installation. Payment will not be required until the work is finished to both your and our satisfaction.

Downtime

How long until you can use your floor?

A double garage takes one to two days on site. You can walk on most epoxy floors after 24 hours and drive on them after 5 to 7 days. Polyaspartic floors cut that to 4 to 6 hours and 24 hours.

SystemWalk onDrive onFull chemical cure
Epoxy (solid or flake)24 hours5-7 days7 days
Polyaspartic4-6 hours24 hours7 days
Industrial build coats24-48 hours7 days7 days

During the first 7 days, avoid spills, hot tyres and dragging heavy objects. Commercial floors are done in stages and outside trading hours where needed, so you can keep operating.

Who do we install epoxy flooring for?

We install for three sectors: residential, commercial and industrial. Each carries different system requirements, compliance obligations and scheduling constraints. A domestic garage and a food-production floor share almost nothing beyond the resin family.

Why choose us over other Perth epoxy flooring companies?

Six operational commitments, each checkable against any competing quote you already hold: fixed pricing, dust-free grinding, a written slab moisture reading, UV-stable topcoats as standard, nominated slip ratings, and a written warranty document.

Fixed-price quotes

We measure and test before quoting, and the price does not move unless you change the scope.

Dust-free grinding

Vacuum-extracted diamond grinding captures approximately 90% of airborne dust, so occupied homes and trading businesses stay usable.

Written slab moisture reading

Recorded on every job and handed to you at completion. Ask any other installer for theirs.

UV-stable topcoats as standard

Specified on every sun-exposed floor, not offered as a paid upgrade.

Nominated slip ratings

Stated on the quote to AS/NZS 4586, with product test data available on request.

5-year written warranty

Handed over as a document rather than given as a verbal assurance.

Failed floors

Has your epoxy floor already failed?

Most failed epoxy floors can be repaired without replacing the slab. We find the cause before recoating, because a floor recoated over the same fault fails again. Each type of failure has a different cause.

Peeling and delamination

Peeling almost always comes from poor preparation: an unground slab, a sealed surface or a damp slab. We grind back the failed coating and reinstall on a properly prepared slab.

Bubbling and pinholes

Bubbles form when air escapes from the slab while the coating cures. A primer coat that seals the slab first stops it happening again.

Hot-tyre pickup

Hot-tyre pickup happens when a coating too soft for cars lifts under warm tyres. Perth summers regularly pass 35°C, so garage floors need a hot-tyre-rated system.

Yellowing

Yellowing means a non-UV-stable topcoat was used on a floor that gets sun. A polyaspartic recoat fixes it.

Send us photos of your floor and we will tell you what went wrong before we quote. See epoxy floor repair in Perth.

Our work

Recent epoxy flooring projects across Perth

Each project below lists the suburb, the system, the floor area and the time on site. Every photo is our own work, taken on the job, so you can compare like with like when you weigh up quotes.

FAQ

Frequently asked questions

Straight answers to the questions Perth customers ask most. Still unsure? Call 0432 666 474.

Epoxy flooring in Perth costs $30 to $150 per square metre installed. Solid-colour epoxy sits at the low end and metallic epoxy at the top. A double garage in flake usually costs $2,100 to $3,400. Slab condition, cracks and moisture treatment move the final price, which we fix in writing after a free on-site measure.

We install epoxy flooring anywhere in the Perth metropolitan area and the Peel region, from Yanchep to Mandurah and east to Kalamunda. That includes Joondalup, Rockingham, Midland, Canning Vale, Baldivis and Ellenbrook. The on-site measure and quote are free across that whole area. Regional WA jobs are quoted case by case.

A correctly installed epoxy floor lasts 10 to 20 years in Perth. Flake and polyaspartic systems reach the top of that range. How long a floor lasts depends far more on slab preparation than on the resin brand, which is why we grind every slab and test its moisture before coating.

Standard epoxy yellows in direct Perth sun, often within 12 to 24 months. A UV-stable aliphatic polyaspartic or polyurethane topcoat stops it. We specify a UV-stable topcoat on every floor that gets sun, including alfrescos, patios, carports and the area just inside a north- or west-facing garage door.

You can drive on a new epoxy garage floor after 5 to 7 days, and walk on it after 24 hours. A polyaspartic floor cuts that to 24 hours for cars and 4 to 6 hours for foot traffic. Avoid hot tyres, spills and dragging heavy objects until the full 7-day cure.

A new slab needs at least 28 days before it can be coated. Age alone is not enough, so we test the slab's relative humidity first. Any reading above 75% needs a moisture-barrier primer. This matters most in new estates such as Baldivis and Ellenbrook, where slabs are often coated too early.

Epoxy cannot go over paint. The paint must be ground off completely, or the new floor lifts with it. Sound, fully bonded tiles can be coated once the glaze is ground off and the grout lines are filled. Loose or drummy tiles must be removed first. Grinding off old coatings is included in our preparation.

Smooth, glossy epoxy is slippery when wet. Flake texture, anti-slip additives and textured topcoats raise the slip rating. We rate floors to AS/NZS 4586, the Australian slip-resistance standard, and name the rating on your quote to suit how the floor is used, from a home garage to a commercial kitchen.

Polished concrete is not always cheaper than epoxy. A simple grind and seal starts lower than most epoxy systems, at around $50 per square metre. Full mechanical polishing on a poor-quality slab can cost more than a flake floor. The slab's condition usually decides which is better value.

Clean an epoxy floor by sweeping or vacuuming, then mopping with warm water and a pH-neutral cleaner. Avoid acidic cleaners, citrus degreasers and scouring pads, which dull the topcoat. Wipe up oil and fuel spills promptly. A well-kept floor keeps its gloss for years without recoating.

We can work in occupied homes and trading businesses. Vacuum-extracted grinding captures about 90% of airborne dust, so the rest of the house or premises stays usable. Commercial floors are done in stages and outside trading hours where needed, so you can keep operating.

Quotes are free. We measure your floor on site, test the slab moisture and send a written fixed-price quote, with no obligation to go ahead. The quote names the system, the slip rating and the warranty, so you can compare it fairly against any other quote you hold.

From start to finish, Charlie and his team were exceptional throughout our extension project. The construction was completed on time and with outstanding quality. The team of tradespeople were courteous, highly competent, and always ready to tackle any challenge. Zach was consistently available and supportive, addressing any questions promptly. I would confidently recommend Epoxy Floor Perth.

customer feedback 9th June 2026

Where do we install epoxy flooring in Perth?

We install epoxy flooring across the whole Perth metropolitan area and the Peel region, from Yanchep in the north to Mandurah in the south and east to Kalamunda. The on-site measure and quote are free anywhere in that area. See all our epoxy flooring service areas across Perth.

We also support clients seeking Epoxy Flooring Contractor in Northern suburbs, Southern suburbs, Eastern suburbs

Get a fixed-price epoxy flooring quote

Tell us the floor size, the space and the finish you want. We measure on site, test the slab, and send a fixed-price quote you can hold us to. Free across Perth and Peel.

Name