We are a Perth epoxy flooring contractor. We coat garages, warehouses, commercial kitchens and showrooms across the Perth metropolitan area and the Peel region — and we prepare every slab properly before we do, because that is the part that decides whether a floor lasts two years or twenty.
Charlie started Epoxy Floor Perth in 2019, after too many years being called out to fix other people’s floors.
The pattern was always the same. A garage coated eighteen months earlier, lifting in sheets where the tyres sat. An alfresco that had ambered through its first summer. A warehouse bay bubbling across the middle. In almost every case the resin itself was fine — the slab underneath had never been properly opened up, or it was still releasing moisture when the primer went down.
Those repair jobs pay well. Grinding a failed floor back and reinstalling it costs more than doing it correctly the first time, and there was a living to be made from other contractors’ shortcuts. It was also obvious that the customer had paid twice for one floor.
So the business was built around the part that causes the failures rather than the part that sells the job. Grinding instead of etching. A moisture reading before the primer, on every slab. A UV-stable topcoat on anything that takes direct sun, whether or not the customer knows to ask for it. It makes us slower than a crew who turn up with a drum of resin and a roller, and it is the reason our floors are still down.
Most epoxy floors that fail in Perth did not fail because of the resin. They failed because the slab underneath was never properly prepared — coated over paint, over a sealed surface, or over concrete still releasing moisture. Preparation is roughly 60% of the labour on a floor we install, and it is the first thing a cheap quote removes.
So we grind rather than acid-etch, we record a relative humidity reading on every slab before we prime it, and we specify a UV-stable topcoat on every floor that takes direct sun rather than selling it as an upgrade. None of that shows up in a finished photograph, which is why we publish the specification alongside our work instead of just the picture.
Seven years on we install twelve resin and concrete systems across Perth and Peel — garages and alfrescos out through the newer estates, commercial kitchens and retail fitouts closer in, and warehouse and factory floors through the industrial corridors.
Charlie still measures most jobs personally and is on site for the grind. That is deliberate. The quote and the floor are the same decision, and handing one to a salesperson and the other to a crew is exactly where a specification quietly changes between the two.
Most of our work now comes from people who were handed the moisture reading and the warranty document at completion, kept them, and passed the number on. We would rather grow that way than on a bigger advertising budget.
We are a Perth epoxy flooring contractor. We coat garages, warehouses, commercial kitchens and showrooms across the Perth metropolitan area and the Peel region
Copyright © 2026 All Right Reserved Epoxy Floor Perth