Garage floors · Perth & Peel

Garage Floor Coating Perth

Epoxy Floor Perth coats single, double and triple garages across Perth and the Peel region in epoxy flake, solid-colour epoxy and UV-stable polyaspartic. Every garage floor is diamond ground dust-free, moisture tested and sealed with a hot-tyre-rated topcoat. A double garage usually costs $2,100 to $3,400, takes one to two days, and comes with a 5-year written warranty.

$2,100-$3,400

Double garage in epoxy flake

1-2 days

On site for a double garage

5-7 days

Until you park (24 hours with polyaspartic)

5 years

Written workmanship warranty

The problem

Is your garage floor stained, dusty or peeling?

Most Perth garage floors fail in one of five ways, and each one gets worse every summer. If you recognise your garage below, the slab needs more than a fresh coat of paint.

None of these are only cosmetic. Each one spreads until the slab is sealed. If an old coating is already failing, start with epoxy floor repair.

Why it happens

Why do garage floors fail so fast in Perth?

Perth garages fail faster than most because of heat, sun and new slabs. Hot tyres soften paint, strong UV yellows standard epoxy at the door line, and many new-estate slabs are coated before they are dry. A garage floor coating only lasts if it is built for all three.

Hot tyres lift garage floor paint

After a drive on a hot Perth summer day, tyres soften floor paint and thin DIY epoxy kits, and the coating lifts when the car moves. This hot tyre pickup is why garage floor paint often fails within 2 to 3 years.

Oil and fuel soak into bare concrete

Concrete is porous. Oil, coolant and fuel soak in and spread below the surface, so scrubbing only lightens the stain, and every drip weakens the bond of any coating put on later.

The sun yellows the garage door line

With the roller door open, direct sun reaches the first metre or two of floor. Perth's strong UV turns standard epoxy amber in that strip within 12 to 24 months, worst in north- and west-facing garages.

New slabs are coated before they are dry

In new estates such as Baldivis, Ellenbrook, Alkimos and Byford, many garages are coated soon after handover. A slab needs at least 28 days, and moisture pushing up from below is the most common reason a new garage coating peels.

The solution

What is an epoxy garage floor coating?

An epoxy garage floor coating is a two-part resin system bonded to diamond-ground concrete. It cures into a seamless, non-porous surface 0.3 to 6 mm thick that resists oil, fuel, hot tyres and wear. It is a coating system, not a paint, and lasts 10 to 20 years when installed correctly.

Epoxy coating (installed)Garage floor paintDIY epoxy kit
Surface preparationDiamond groundSwept or washedUsually acid etched
Hot tyresRated for hot tyresLifts under hot tyresOften lifts
Sun at the doorUV-stable topcoat availableFadesUsually yellows
Typical life10 to 20 years2 to 3 yearsDepends on preparation

Preparation is the real difference. Acid etching only cleans the top of the slab. Diamond grinding opens the surface so the resin keys into it, which is why every garage we coat is ground, never etched.

Published prices

How much does garage floor coating cost in Perth?

Garage floor coating in Perth costs $1,200 to $1,900 for a single garage, $2,100 to $3,400 for a double and $3,000 to $4,800 for a triple, in epoxy flake. Solid-colour epoxy costs less and polyaspartic costs more. Your fixed price comes after a free on-site measure.

Price by garage size

GarageTypical floor areaEpoxy flake, installed
Single18-21 m²$1,200-$1,900
Double36-40 m²$2,100-$3,400
Triple54-60 m²$3,000-$4,800

What changes your garage price

Every epoxy garage floor we quote in Perth gets a fixed price after the measure that does not change. See the full guide to epoxy garage floor cost in Perth.

Compare systems

Which garage floor coating should you choose?

Choose epoxy flake for most Perth garages, polyaspartic if your garage door faces the sun or you need the car back in a day, and solid-colour epoxy for a workshop on a budget.

SystemInstalled costLookUV at the doorPark afterSlip rating
Epoxy flake$55-$90 / m²Speckled, hides dustWith UV topcoat5-7 daysP4-P5
Polyaspartic flake$70-$120 / m²Speckled, high glossYes24 hoursP3-P5
Solid-colour epoxy$30-$55 / m²Plain colourNo5-7 daysP2-P3
Metallic epoxy$80-$150 / m²Marble effectNo5-7 daysP1-P2

Epoxy vs polyaspartic for a garage comes down to sun and time. Polyaspartic costs about $15 to $30 more per square metre, but it holds its colour in direct sun and you can park on it the next day. For a garage that stays shut and shaded, epoxy flake is the better value.

Our process

How do we coat a garage floor?

We coat a double garage in one to two days, in seven fixed steps. Preparation takes about 60% of the work, because a garage floor coating is only as strong as its bond to the slab.

01

Measure and test

We measure the floor, note oil stains, cracks and old coatings, and record a slab moisture reading.

02

Degrease and grind

Oil stains are degreased, then the whole slab is diamond ground with vacuum extraction that captures about 90% of the dust.

03

Repair cracks, keep joints

Cracks are routed and filled with resin. Control joints are kept, so slab movement does not crack the new floor.

04

Prime

A penetrating primer seals the slab. Readings above 75% get a moisture-barrier primer.

05

Base coat and flake

The coloured base coat goes down, and flake is broadcast into it until the floor is fully covered.

06

Scrape and topcoat

Loose flake is scraped off, then a hot-tyre-rated clear topcoat seals the floor, UV-stable at the door line.

07

Walk-through

We walk the floor with you and hand over the moisture reading, your cure times and the written warranty.

Downtime

How long until you can park in your garage again?

You can walk on a new epoxy garage floor after 24 hours and park on it after 5 to 7 days. With polyaspartic, you can walk on it after 4 to 6 hours and park the next day. Full chemical cure takes 7 days for both.

Epoxy flakePolyaspartic flake
Time on site1-2 days1 day
Walk on24 hours4-6 hours
Park the car5-7 days24 hours
Full chemical cure7 days7 days

Before we arrive, empty the garage completely, including shelves that stand on the floor, and plan to park on the driveway or street until the floor is ready.

Beyond the garage

Can you coat a shed, workshop or man cave floor?

We coat sheds, workshops and man caves with the same systems we use in garages. Workshops usually get a heavier solid-colour or flake build to handle dropped tools and trolley jacks, and man caves often get metallic epoxy for a showpiece finish. In the hills, around Kalamunda and Forrestfield, most of our jobs are large sheds and workshops.

If your garage slab is pitted or patched, garage floor resurfacing with grinding and a flake coating fixes it without pouring new concrete.

Local service

Do you coat garage floors near me?

We coat garage floors in every suburb of the Perth metropolitan area and the Peel region, from Yanchep to Mandurah and east to Kalamunda, at the same rates with a free measure. What your garage needs depends on where it is.

New-estate suburbs

Mostly new slabs. Every one is moisture tested and coated no earlier than 28 days, with a moisture-barrier primer where the reading is high.

Baldivis 6171 · Ellenbrook 6069 · Alkimos 6038 · Byford 6122 · Banksia Grove 6031 · Butler 6036 · Yanchep 6035

Coastal and sunny garages

Garages that open to strong afternoon sun get a UV-stable topcoat across the door line, so the floor stays one colour.

Scarborough 6019 · Hillarys 6025 · Duncraig 6023 · Fremantle 6160 · Rockingham 6168 · Mandurah 6210

Established suburbs

Older slabs often carry years of oil stains, old paint and cracks, so degreasing, grinding and crack repair make up more of the job.

Joondalup 6027 · Morley 6062 · Midland 6056 · Canning Vale 6155 · Willetton 6155 · Gosnells 6110

Hills and semi-rural

Bigger sheds and workshops, often with dusting slabs that need a heavier build or concrete densification first.

Kalamunda 6076 · Forrestfield 6058 · High Wycombe 6057 · Swan Valley

Our work

Recent garage floors across Perth

Each garage below lists the suburb, the system, the floor size and the time on site, so you can compare it with your own.

Warranty

What does the 5-year warranty cover on a garage floor?

Every garage floor we coat has a 5-year written workmanship warranty, plus the manufacturer's warranty on the resin. You get it in writing on the day we finish.

What is covered

What is not covered

Why us

Why choose Epoxy Floor Perth for your garage floor?

We make six garage-specific commitments you can check against any other quote you hold.

Fixed price after a measure

No changes once work starts.

Ground, never etched

A mechanical bond on every slab.

Moisture reading in writing

Tested on every slab.

Hot-tyre-rated topcoat

Standard, not an upgrade.

UV-stable at the door line

Wherever the sun reaches.

7+ years in Perth

Backed by a 5-year written warranty.

Free measure and quote

Get a fixed price for your garage floor

For garage floor epoxy anywhere in Perth, send your suburb and garage size or a few photos. We will give you a price range and book a free measure for a fixed price.

Name

FAQ

Garage floor coating questions

More answers on our epoxy flooring FAQs page.

A double garage of 36 to 40 m² costs $2,100 to $3,400 to epoxy in Perth with a flake finish. Solid-colour epoxy costs less and polyaspartic costs more. Heavy oil stains, cracks or high slab moisture add to the price, which we fix in writing after a free on-site measure.

An epoxy garage floor lasts 10 to 20 years when the slab is diamond ground and moisture tested before coating. Flake and polyaspartic systems reach the top of that range. Floor paint usually lasts 2 to 3 years, because it sits on the surface and lifts under hot tyres.

A properly installed epoxy garage floor does not lift under hot tyres. Hot tyre pickup happens with floor paint and thin DIY kits that sit on top of the slab. We diamond grind the concrete, build the coating to the right thickness and finish with a hot-tyre-rated topcoat.

We cannot coat over garage floor paint, because the new coating would only be as strong as the paint underneath. We grind all paint and failed coatings off back to bare concrete, then coat the clean slab. Removing old coatings is part of our preparation and is priced into your quote.

An epoxy flake garage floor is not slippery in normal use, because the flake gives the surface texture. Flake floors typically rate P4 to P5 under AS/NZS 4586. Smooth solid-colour and metallic floors are slipperier when wet, so we can add an anti-slip additive to the topcoat.

We coat garage floors anywhere in the Perth metropolitan area and the Peel region, including Joondalup, Baldivis, Ellenbrook, Rockingham, Canning Vale, Midland and Mandurah. Every suburb gets the same rates and a free on-site measure. Call 0432 666 474 with your suburb and garage size for a price range.

You need to empty the garage completely, including cars, boxes and shelving that stands on the floor, because we grind and coat the whole slab in one go. Wall-mounted cabinets that sit clear of the floor can stay.

A DIY epoxy garage kit costs less upfront but rarely lasts in Perth. Most kits rely on acid etching instead of grinding, go on thinner than a professional system and have no UV-stable topcoat, so they often lift under hot tyres or yellow at the door. Failed kits must be ground off before recoating.