2026 prices · Perth & Peel
Epoxy flooring in Perth costs $30 to $150 per square metre installed in 2026, depending on the system, the slab and the floor size. A double garage in epoxy flake usually costs $2,100 to $3,400. Use the calculator below for an estimate, then book a free on-site measure for a fixed price that does not change.
$30-$150 / m²
Installed, all systems
$2,100-$3,400
Double garage in epoxy flake
Free
On-site measure and slab test
Fixed
Written price, no call-out fee
Calculator
Choose a system, enter your floor size and tick anything that applies. The calculator uses the same per-square-metre ranges as our quotes, so the estimate is a fair guide to what a fixed price will look like.
Estimated installed price
$2,100 to $3,400
Estimate only. Your fixed price comes after a free on-site measure.
Get my fixed priceThe problem
Two quotes for the same double garage in Perth can be thousands of dollars apart. One listing site puts the range for a WA double garage at $2,200 to $6,500. The gap is rarely profit. It is what each quote includes.
Most people only find out what was left out of a cheap quote when the floor starts to fail.
What gets left out
A low quote usually saves money on the steps you cannot see once the floor is finished. Each one is a common reason Perth floors fail in the first few years, and fixing a failed floor means grinding it off and paying twice.
Acid etching is cheaper and faster than diamond grinding, but it only cleans the surface. Without a ground profile the coating has little to bond to and lifts under hot tyres.
Skipping the test saves time on the day. On a damp slab, especially a new one, moisture pushes the coating off from below within months.
A single thin coat looks fine at handover but wears through in traffic lanes and stains easily. A proper system has a primer, a build coat and a sealing topcoat.
Some quotes leave out crack repair, old coating removal or moisture primers, then add them once the job has started. A fixed price after a proper measure avoids that.
Price per m²
Epoxy flooring costs $30 to $55 per square metre for solid colour, $55 to $90 for flake, $70 to $120 for polyaspartic and $80 to $150 for metallic, installed in Perth. Prices include grinding, primer, coats and topcoat.
| System | Installed cost | Typical life | Best for |
|---|---|---|---|
| Solid-colour epoxy | $30-$55 / m² | 10-15 years | Warehouses, workshops, budget garages |
| Epoxy flake | $55-$90 / m² | 15-20 years | Garages, laundries, patios |
| Polyaspartic flake | $70-$120 / m² | 15-20 years | Sunny outdoor floors, next-day parking |
| Metallic epoxy | $80-$150 / m² | 10-15 years | Showrooms, living areas, man caves |
| Polished concrete / grind and seal | $50-$100 / m² | 20+ years | Open-plan homes, retail |
| Heavy-duty industrial | $60-$150 / m² | 15-25 years | Factories, cool rooms, food production |
Garages
It costs $1,200 to $1,900 to epoxy a single garage, $2,100 to $3,400 for a double and $3,000 to $4,800 for a triple in epoxy flake. Polyaspartic flake costs more because it will not yellow and you can park on it the next day.
| Garage | Floor area | Epoxy flake | Polyaspartic flake |
|---|---|---|---|
| Single | 18-21 m² | $1,200-$1,900 | About $1,300-$2,500 |
| Double | 36-40 m² | $2,100-$3,400 | About $2,500-$4,800 |
| Triple | 54-60 m² | $3,000-$4,800 | About $3,800-$7,200 |
Larger garages cost less per square metre, because setting up and grinding cost much the same for any size. Garage floor coating cost also rises with oil stains and old paint, common in older Perth garages, and falls when the slab is new, clean and dry. See garage floor coating.
Homes
Outdoor floors cost $70 to $120 per square metre because they need a UV-stable topcoat. Indoor feature floors cost $50 to $150 depending on whether you choose polished concrete or metallic epoxy.
| Space | Usual system | Typical installed cost |
|---|---|---|
| Alfresco, patio or pool surround | Polyaspartic flake, anti-slip | $70-$120 / m² |
| Laundry or bathroom | Epoxy flake | Minimum charge under 15 m² |
| Living area or showroom | Metallic epoxy | $80-$150 / m² |
| Open-plan home or shop | Polished concrete | $50-$100 / m² |
| Driveway or carport | Heavy-build polyaspartic | Quoted after a site check |
Outdoor floors cost more than the same floor indoors because of the topcoat, not the labour. A polyaspartic topcoat costs more than epoxy but stops yellowing, and it is the part of an outdoor floor you would otherwise redo first.
Business
Commercial and industrial epoxy flooring in Perth costs $30 to $150 per square metre. Warehouses with solid-colour coatings sit at the low end, and chemical-resistant or food-grade floors at the top. Large floors cost less per square metre.
| Floor | Usual system | Typical installed cost |
|---|---|---|
| Warehouse or workshop | Solid-colour epoxy, line marking | $30-$55 / m² |
| Factory or processing plant | Heavy-duty industrial | $60-$150 / m² |
| Commercial kitchen | Food-grade, coved system | $60-$150 / m² |
| Showroom or retail | Metallic epoxy or polished concrete | $50-$150 / m² |
Out-of-hours work, line marking and coving at the walls are priced into the quote, so the number you approve is the number you pay.
Price factors
Five things push a price up and four bring it down. Every one is checked at the free measure, before you get a fixed price.
Included
Every fixed price we quote includes the full system, start to finish. Nothing on this list is added later.
Before you sign
Ask every installer the same seven questions. A quote that cannot answer them clearly is not cheaper, only vaguer.
Grinding should be the answer.
Ask for the reading in writing.
Look for primer, build coat and topcoat.
Essential for any floor in the sun.
Partial flake shows the base coat.
It should be named under AS/NZS 4586.
Both should be on paper before work starts.
Value
Cheap epoxy flooring is rarely worth it in Perth, because the savings come from preparation, and preparation decides how long the floor lasts. A floor that fails in two years has to be ground off before it can be redone. Affordable is different: a solid-colour system or a smaller area keeps the price down without cutting steps.
Near you
Our epoxy flooring prices are the same in every suburb of the Perth metropolitan area and the Peel region, from Yanchep and Joondalup to Rockingham, Baldivis and Mandurah, and east to Midland and Kalamunda. There is no call-out fee and the measure is free. If you are searching for epoxy flooring near me, the price is the same wherever you are. Regional Western Australia is quoted case by case.
Free measure
Send your suburb, the space and a rough size, or a few photos. We will give you a price range straight away and book a free on-site measure for a fixed written price.
Epoxy flooring in Perth costs $30 to $150 per square metre installed. Solid-colour epoxy costs $30 to $55, flake $55 to $90, polyaspartic $70 to $120 and metallic $80 to $150. The price covers grinding, primer, coats and topcoat. Your fixed price comes after a free measure.
It costs $2,100 to $3,400 to epoxy a 36 to 40 m² double garage in Perth with an epoxy flake finish. Polyaspartic flake costs about $2,500 to $4,800. Oil stains, cracks and high slab moisture add to the price, which we fix in writing after a free measure.
Polished concrete is not always cheaper than epoxy. A simple grind and seal starts at around $50 per square metre, which is less than flake. Full mechanical polishing on a poor slab can cost $100 per square metre or more, which is more than most epoxy systems.
A higher epoxy quote usually includes steps a cheaper one leaves out, such as diamond grinding, a moisture test, a full flake broadcast or a UV-stable topcoat. Ask both installers the same questions about preparation, coats, topcoat and warranty, and compare what each price actually covers.
Floors under 15 square metres, such as laundries and small bathrooms, carry a minimum charge. Setting up, grinding and mixing cost much the same for a small room as a large one. Doing a small room on the same visit as a garage usually avoids it.
The calculator uses the same per-square-metre ranges we quote from, so it is a fair guide. It cannot see your slab, so oil, cracks, old coatings or moisture can move the final figure. The free on-site measure turns the estimate into a fixed price.
We do not charge for quotes or call-outs anywhere in the Perth metropolitan area or the Peel region. The on-site measure, slab moisture test and written fixed-price quote are free, with no obligation to go ahead.
Epoxy floors do not cost more outside central Perth. Every suburb from Yanchep to Mandurah and east to Kalamunda gets the same rates and a free measure. Call 0432 666 474 with your suburb and floor size for a price range.
We are a Perth epoxy flooring contractor. We coat garages, warehouses, commercial kitchens and showrooms across the Perth metropolitan area and the Peel region
Copyright © 2026 All Right Reserved Epoxy Floor Perth